Xtreme-Motorings Project Nova SRi
2 posters
Page 1 of 1
Xtreme-Motorings Project Nova SRi
Right its about time i pulled fingure out, i should have started on this posting ages ago really, well as most of you know its a 1993 white nova SRi,
How she stud at YMS,
This is how she stands as of today,
Inside.
The bay, dont look to clean
The plans are to strip it out remove as much as possible and see were i stand condition wise and sort out any major problems and afew bits of rust.
My main goal is to have,
Then start to think about the engine, do i go redtop or c20LET
Im sure along the way il add to my list or change my mind as you do
Cheers
Calibra-keith
How she stud at YMS,
This is how she stands as of today,
Inside.
The bay, dont look to clean
The plans are to strip it out remove as much as possible and see were i stand condition wise and sort out any major problems and afew bits of rust.
My main goal is to have,
- Wide kit and be light as possible replace as many body parts with fibreglass or (if i can find the funds) afew carbon parts
- Strip it out, if its not needed then its not staying.
- Roll cage
- Bucket seats,belts
- Polycarbonate windows (full set)
- 16 Inch soft stars or maybe comp mo's in white
Then start to think about the engine, do i go redtop or c20LET
Im sure along the way il add to my list or change my mind as you do
Cheers
Calibra-keith
Re: Xtreme-Motorings Project Nova SRi
just a small update, didn't have much time today but made a start on removing a few bits from there rear,
was bit of a mess
well still abit of a mess, need to remove the glue and tar like crap.
needs abit chopping out and a plate welding in the corner
hopefully i will have bit more time during the weekend to remove more and have abit of a clean up and a sand down.
cheers
was bit of a mess
well still abit of a mess, need to remove the glue and tar like crap.
needs abit chopping out and a plate welding in the corner
hopefully i will have bit more time during the weekend to remove more and have abit of a clean up and a sand down.
cheers
Re: Xtreme-Motorings Project Nova SRi
looking good wot else you doing to it mate
duracelbunny- Moderator
-
Number of posts : 269
Age : 40
Location : barnsley
Job/hobbies : mechanic
Registration date : 2008-04-05
Re: Xtreme-Motorings Project Nova SRi
Well the weather was not on my side today but did what i could,
i removed front seats
then removed all the sound deadening and door cards aswell as wires/stereo and tv's
now for the bad bits
thinking about cutting the spare wheel area out and plate it up.
who ever did this area clearly did not master the age old art of silicone welding lol
and a plate some one has bodged in at somepoint in its life. cutting that out for sure.
next is to remove the dash at somepoint, then cut out all the rust areas start from fresh have a tidy up treat afew areas and give it a lick of paint.
i removed front seats
then removed all the sound deadening and door cards aswell as wires/stereo and tv's
now for the bad bits
thinking about cutting the spare wheel area out and plate it up.
who ever did this area clearly did not master the age old art of silicone welding lol
and a plate some one has bodged in at somepoint in its life. cutting that out for sure.
next is to remove the dash at somepoint, then cut out all the rust areas start from fresh have a tidy up treat afew areas and give it a lick of paint.
Re: Xtreme-Motorings Project Nova SRi
how u going to drive it with no seats
only joking mate and its coming on well have to keep us updated mate
only joking mate and its coming on well have to keep us updated mate
duracelbunny- Moderator
-
Number of posts : 269
Age : 40
Location : barnsley
Job/hobbies : mechanic
Registration date : 2008-04-05
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|